|
 |
Car Alarm Kit
The alarm detects
sudden voltage drops of the battery when the interior, trunk, or hood
lights are switched on. To ensure correct operation, a number of control
indications have been included, such as : flashing LED to indicate that
the alarm is in standby mode after a set time (after you have left the
car). Pre-alarm (built-in buzzer) to indicate that the alarm is activated,
so that you will not forget to switch it off. The alarm is easy to switch
on and off, either automatically or by means of the ignition switch or a
remote control unit, such as our
HD2Combo
Specifications:
- detects voltage
drops of the battery
- entry delay
time: 2 to 30 seconds with buzzer indication
- exit delay
time: 2 to 180 seconds with LED indication
- alarm period:
60 seconds with automatic reset
- power supply:
12V
- standby
current: 25mA
- relay output:
5A
- PCB dimensions:
2.4" x 3.9"
See
VEK3504alone.pdf
and
VEK3504alonechassis.pdf for examples on
how to wire device. Requires
Adobe Acrobat Reader available at
www.adobe.com
for FREE!
|
VIEW CART/CHECK OUT
