|
Serial Data Link
Kits This Transmitter Receiver kit can receive up to 64 characters via its serial port. The
serial port baud rate is selectable from 300, 1200, 2400 and 9600. The
data format is fixed at 8N1(8 data bits, no parity, 1 stop bit). Two input modes are available
as well as input echo if required. An optional destination address can be automatically inserted into the message before transmitting.
Specifications:
- Transmitter L: 2-3/8" W: 2" H: 7/8"
- Receiver L: 2-3/8" W: 1-7/8" H: 7/8:
- Power Requirement: 12 VDC
(Need a Power Supply?)
- Operates at 433.92 MHz. (uses amplitude modulation)
- Up to 16 Receivers can be used in a Network
See the following documents for complete
details, including schematic and theory of operation. Requires
Adobe Acrobat Reader available at
www.adobe.com
for FREE!
K173.pdf - Serial Data
Transmitter
K174.pdf - Serial Data Receiver
Technical Manual.pdf - Covers all RF Data Link
units
|
