|
Parallel Data Link
Kits K175 monitors 8 digital inputs for change. If change is detected on any input the state of all the inputs is
transmitted. An optional destination address can be added to the message before transmitting. The pinout of the input
connector allows direct connection to a PC printer port.
Specifications:
- Transmitter L: 2-3/8" W: 1-7/8" H: 7/8"
- Receiver L: 2-3/8" W: 2-3/8" H: 7/8:
- Power Requirement: 12 VDC
(Need a Power Supply?)
- Operates at 433.92 MHz. (uses amplitude modulation)
- Up to 16 Receivers can be used in a Network
See the following documents for complete
details, including schematic and theory of operation. Requires
Adobe Acrobat Reader available at
www.adobe.com
for FREE!
K175.pdf -
Parallel Data
Transmitter
K176.pdf -
Parallel Data Receiver
Technical Manual.pdf - Covers all RF Data Link
units
|
