|
(click picture to enlarge)
(FCC Certification for transmitter
click to enlarge.) |
2 Channel Auto Roll RF
Remote Control Relay Board - Kit or Assembled
This two channel Auto Roll UHF Remote Control is virtually
impossible to 'crack'. Two channels that are selectable as either
latching or momentary. Transmitter is FCC Certified. Each relay has led indicators. Receiver can
support up to 15 transmitters. This kit makes
remote control very affordable for you next project.
Specifications:
- Range is over 30 yards (120 feet).
- Transmits on 433.9 MHz
- Transmitter comes fully assembled and includes battery.
Transmitter is FCC Certified.
- Receiver Power 12 VDC (power supply not included)
(Need a Power Supply?)
- Circuit draws 8mA in idle state, 1 relay energized 44mA and
2 relays energized draws 78mA.
- Relays have a Common, Normally Closed (NC), and Normally Open
(NO).
- Each Individual Relay is jumper selectable latching or momentary.
- Relay Contact Ratings: 240VAC 7Amps, 125VAC 10Amps, 28VDC
10Amps. (more
info on how relays work)
- Includes transmitter and receiver.
- Transmitter Dimensions 2-1/4" L x 1-1/2" W x 1/2"
D
- Receiver Board Dimensions 3-3/8" L x 2-3/8" W x
7/8" H
See
CK1617.pdf for complete
details, including schematic and theory of operation. Requires Adobe
Acrobat Reader available at
www.adobe.com
for FREE!
|
