|
 |
Digital Multi Meter Kit
- Assembly and Soldering Required
If you are using or planning to use a digital multi-meter in your
training programs, you must consider this training kit. It is easy to assemble and comes
with a complete training course, using sequential assembly procedures and testing.
Specifications: 3.5 inch digit display, 34 ranges, 20 amp AC-DC current, measures
capacitance and transistors.
Features:
-
Extra Large 1" Display 3.5 Digits
-
Transistor & Diode Test
-
Overload protection
-
Capacitance to 200uF
-
Audible Continuity Test
-
AC/DC Current Measurement to 20Amps
- Low Battery Indication
- Rubber Holster w/ Tilt Stand
- Safety input sockets for test leads.
- Includes 9 Volt Battery, Test Leads, and Manual
Specifications:
-
Size: 3.5"W x 7. 5"L x 1.4"D
-
AC and
DC Volts: 200mV, 2V, 20V, 200V, 1000V,
750VAC
-
Accuracy: 0.5% DC, 1% AC
-
Resolution: 0.1mV
-
AC and
DC Current: 200µA (DC Only), 2mA, 200mA, 20A
-
Accuracy: 1% DC, 1.5% AC, 20A 2%
-
Resolution: 0 .1µA
-
Resistance: 200 ohm, 2K ohm, 20K ohm, 200K ohm, 2M ohm
-
Accuracy: 0.8%, 3% 20Mohm
-
Resolution: 0 .1 ohms
- Capacitance: 2nF, 20nF, 200nF, 2uF, 20uF, 200uF
- Resolution: 1pF
See
M2666K.pdf for complete
details, including schematic and theory of operation. Requires Adobe
Acrobat Reader available at
www.adobe.com
for FREE!
|
