|
(Click to Enlarge Picture) |
Liquid Level Controller Kit
Forgotten to turn
off the tap, leaking washing machines, water level dropping in your
aquarium, rain tank or water tank suddenly dry or over flowing, water in
your cellar, etc. Such situations are often the cause of trouble and
financial burden. Prevention is key, so use this fluid detector. This
multifunctional device is easy to use in a variety of applications : 1)
LED control of set fluid level : LOW, MIDDLE, HIGH ; 2) Controller : the
relay automatically switches a pump and/or valve to keep the fluid level
between the LOW and HIGH marks ; 3) Alarm : if the sensor detects a
level which is too high or too low (selectable), the relay will operate
a bell or other alarm device.
Specifications:
- Main Board: L: 4-1/8" W: 2-3/8" H: 3/4"
- Level Board: L: 4-1/8" W: 1" H: 1/16"
- Power Supply: 12 - 14VAC (min 300mA) or
16 - 18VDC (min 100mA)
- Relay Contact Ratings: 28VDC@10A, 250VAC@10A,
120VAC@15A
- Relay has a Normally Open and Normally Closed Contact
See
VEK2639.pdf for complete details,
including schematic and theory of operation. Requires Adobe
Acrobat Reader available at
www.adobe.com
for FREE!
|
