|
Function Generator Kit
Learn Surface Mounting Techniques with the Elenco
9600K function
generator. Includes 40 surface mount components: IC's, resistors, capacitors, pots and
clips. Teaches you to identify surface mount parts and soldering techniques.
Specifications:
Input Voltages
+5V
-5V
GND
Main Generator
SineWave
Frequency Range 1Hz to 1MHz
SineWave output Max. 2 Volts Peak to Peak
SineWave distortion 1Hz to 10KHz 1%max
10KHz to 1MHz 2% typical
Output Impedance 600Ohm
Sawtooth Waveform
Frequency Range 1Hz to 1MHz
Sawtooth Output Max 4 Volts Peak to Peak
Output Impedance 600Ohm
Amplitude Variation
1Hz to 100KHz 0l1 dB Max
100KHz to 1MHz 4 dB Max
DC offset (Variable)
+1V to -1V Minimum
+1.5V to -1.5V typical
Note: DC offset plus signal cannot exceed maximum peak voltage or clipping will occur.
Squarewave TTL
Frequency Range 1Hz to 1MHz
Squarewave output 5 volts Peak to Peak
Output impedance 600 Ohm
rise time 250nsec
Fall Time 50nsec
Capable of driving 1 TTL load
AM Modulation
Input Impedance 200K Ohm
Mod. index @ 100KHz .1 @ .1 volt PP
.5 @ .6 volt PP
.8 @ 1.6 volt PP
Modulation index is independent of amplitude setting.
FM Modulation
Input impedance 200K Ohms
Sweep linearity 2%
FM distortion .1% @ +/- 10% deviation.
|
