|
click image to enlarge
diy k30 |
PIR Movement Detector
Kit
This is an excellent security device, it senses infra red heat of
intruder in field of view. This recent design for a PIR detector should
not be under estimated. Rather than the usual op-amps and amplifiers, this
kit uses the RE200B PIR Sensor and the KC778B Master PIR Control Chip (MPCC).
This IC has the built in functions of motion sensitivity, light sensitivity and
delay off timing. When tripped an LED
indicator lights and a voltage out is activated to sound your siren, or you can
add a relay to switch larger loads. "Sees" up to 18 feet - DIY Kit 30.
Specifications:
- L: 3" W: 1-7/8" H: 1-1/2"
- Power: 9 - 12 VDC @ 300 mA.
(Need a Power Supply?)
- Range: Up to 18 feet
- Movement Sensitivity Adj.
- Light sensitivity Adj. for Day/Night use.
- Exit delay option.
- Alarm on-time Adj.
- LED indicator when motion is detected, and voltage output
to trigger your choice of output (i.e. siren, light, relay etc...).
CK206.pdf for complete details,
including schematic and theory of operation.
RE200B.pdf for PIR
Sensor
Specs.
KC778B.pdf for IC Specs.
These files Require Adobe Acrobat Reader
available at www.adobe.com for FREE!
Take a look at our
PIR Module and
Components Page to purchase individual PIR modules and components.
|
VIEW CART/CHECK OUT
