Sale!

60MHz Oscilloscope with Delayed Sweep

$995.00 $895.00

60MHz Oscilloscope with Delayed Sweep – Elenco s-S1360

This 60 MHz Delayed Sweep Oscilloscope is feature packed.  Perfect for demanding electronics applications such as chools, universities, labs, and electronics repair operations.  Elenco S-1360

Product Description

60MHz Oscilloscope with Delayed Sweep – Elenco S-1360

This 60 MHz Oscilloscope with Delayed Sweep is feature packed.  Perfect for demanding electronics applications such as schools, universities, labs, and electronics repair operations.  Elenco S-1360

Features:

  • Delayed Sweep & Dual Trace
  • 1mV/DIV Sensitivity.
  • Sweep to 10ns/DIV.
  • Component Tester
  • Z Axis Input.
  • Single Sweep.
  • Beam Finder.
  • Front face dust cover included.

Detailed specifications:

Vertical Amplifiers(CH1 and CH2) Trigger   
Sensitivity:
5mV/div – 5V/div(x1 mode)
1mV/div – 1V/div(x5 mode)
Trigger Coupling: AUTO, NORM, TV-V, TV-H   
Trigger Source: CH 1, CH 2, ALT (V MODE), LINE, EXT 
Attenuator:
1-2-5 sequences, 10-step attenuator, plus vernier control
Slope: ±
Trigger Sensitivity
 Rise Time: About 5.8ns Coupling  Bandwidth  Internal  External
Over Shoot: Less than 5% TV-V DC – 1kHz 1.0 div 0.1Vpp
Input Impedance: 1MΩ ±2%, 25pf ±10pF TV-H 1kHz – 100kHz 1.0 div 0.1Vpp
Max. Input Voltage: 400V (DC + AC peak) AUTO 100Hz – 60MHz 1.5 div 0.1Vpp
Operating Modes:
CH 1, CH 2, Dual(ALT or CHOP), and ADD
NORM 100Hz – 60MHz 1.5 div 0.1Vpp
Component Tester
Chop Frequency: Approximately 500kHz Test Voltage: Max. 6Vrms (open circuit)
Algebraic addition: CH 1 + CH 2, CH 1 – CH 2 Test Current: Max. 11mA (shorted)
Inverter: CH 2 only Test Frequency: Line Frequency
Horizontal Amplifier Components: Capcitors, inductors, diode, transistor, zener, etc.
X-Y mode: Switch selectable using X-Y switch
CH 1: X-axis
CH 2: Y-axis
CH 2 Output
Output Level: 100mV/div (no lead) 50mV/div (50Ω lead)
Accuracy:  Y-axis ±3%, X-axis ±6% Bandwidth: 20Hz – 20MHz (-3dB)
Bandwidth: DC – 1MHz(-3dB) Other Specifications
X-Y phase difference:  Approximately 3º at 50kHz. CRT: TYPE: Rectanglular with internal graticule.
Sweep System       Display Area:  8 x 10 div (1 div = 1 cm)
Sweep Display Mode:  Main, Mix, Delay       Accelerating Voltage: 12kV
Hold Off Time:  5:1 continuously variable(0.1µs/div)       Phosphor: P31
Main Sweep Z Modulation: Positive TTL signal, low level blank intensity at any intensity, high level unblank any intensity.
Sweep Speed: Trace Rotation: Adjustable front panel
0.1µs/div – 0.2s/div in 1-2-5 sequence 23 steps Calibrator: Square wave 1kHz, 2.0Vpp ±3%
Accuracy: ±3% Power Requirements:115, 223VAC ±10%, 50/60Hz
Variable Time Control:5:1, uncalibrated, continuously variable between steps. Power Consumption: Approximately 55 watts
Sweep Magnification:
10X, ±10%, extend sweep speed up to 10ns/div
Supplied Accessories:Two x1, x10 probes, scematic diagram & parts list, AC Power cord, spare fuse and dust cover
Delayed Sweep  
Sweep Speed:0.1µs/div – 2s/div in 1-2-5 sequence 23 steps  
Accuracy: ±3%
Delay Time Position:Variable control to locate desirable waveform for extending

Reviews

There are no reviews yet.

Be the first to review “60MHz Oscilloscope with Delayed Sweep”

Your email address will not be published. Required fields are marked *

You may also like…

0