12V DC Xenon Tube Flasher Kit – K163

Product Description

12V DC Xenon Tube Flasher Kit -K163

This Kit builds the circuit to trigger a high voltage xenon flashtube using a 12V DC input from a power supply. The flash rate can be varied between 1 and 2 flashes per second using an onboard potentiometer. Component changes can move the flash rate range faster or slower. The Kit is constructed on a single -sided printed circuit board (PCB). Protel Autotrax and Schematic were used to design the board.

Specifications:

• Requires 12 Volt DC power supply
• L: 3-7/8″ W: 1-5/8″ H: 3/4″
• Flash rate between 1 and 2 times per second (can be changed by changing resistor and capacitor values)
• Electronic Kit – Soldering required

Click Here For K163 12V DC Xenon Tube Flasher Kit Instruction Manual

PARTS LIST – K163:
Resistors (1W)
620 blue red brown …………… R1…………………………………1
1M brown black green………. R2…………………………………1
Capacitors
0.47 474/630V polyester……..C2 …………………………………1
0.1 104/400V polyester………. C2 alternative………………..1
1uF 50V electrolytic …………..C1…………………………………1
33uF 350V electrolytic ………. C3…………………………………1
Semiconductors
1N4007 ……………………………… D1,2………………………………2
H1061 transistor, NPN ………. Q1…………………………………1
K1300E70 sidac…………………. Q2…………………………………1
Miscellaneous
Potentiometer, 1M…………….. P1………………………………….1
Transformer EE19……………… T1…………………………………1
Trigger coil ………………………..T2…………………………………1
Fuse holder ………………………. FS1 ……………………………….1
Fuse, 1amp ……………………………………………………………….1
Xenon U-flashtube, U106 ………………………………………….1
PCB, K163………………………………………………………………….1